Home WX Network mobile app

WX Network mobile app

Lars
By Lars
• 21 articles

WX Network: Account creation

Highlighted topics: - How to set up an email account - How to set up a seed account The WX Network mobile application allows you to use different types of accounts: an account associated with the email address, an account associated with the seed phrase and also you can use Ledger account. To set up a new account, install the WX Network app. After installing the application, select the interface language and read the welcome information. Next, confirm your agreement with the WX.Network terms and conditions of use and click the Continue button. On the next tab you will be asked to select the type of account you want to set up. Note: if you are already logged in to the account, log out before making the next steps. How to set up an email account Step 1: if you want to set up an email account just click on the Sign Up (with email) button. Step 2: enter the credentials of your new account: email and password. After that confirm the password and click on the Continue button. Note: The password must be at least 8 characters long, contain an uppercase letter, number, special character. Step 2: a message with a 6-digit code will be sent to the e-mail address you specified. Enter the code from the message in the next tab. Note: the 6-digit code for email verifying can be sent again in 60 seconds. Step 3: On the next tab you will be asked to protect your account with a passcode (enter the passcode twice). Step 3: once you create the passcode, you will be proposed to use a fingerprint or Face ID for the account login. Select Use fingerprint or Use Face ID if you prefer to sign in with your fingerprint/Face ID, or select Not now. That's all! Welcome to your new account! How to set up a seed account Step 1: If you want to set up a seed account, select Software (Log in via seed). Step 2: click on the Create a new account button Step 3: at this step select an account avatar and choose an account name, then set a password and confirm it. After that click on the Continue button. Step 4: be sure to save your account's Seed Phrase (15 English words), as only with it you can recover access to your account in an unforeseen situation. Then click "I've written it down", on the next screen you need to enter your secret Seed phrase in the correct order. Important: under no circumstances should you pass the Seed to third parties. Read more - Account security and protection Step 5: protect your account with a passcode (enter your passcode twice). Step 7: once you create the passcode, you will be prompted to use your fingerprint or Face ID to log into your account. Select Use fingerprint or Use Face ID if you prefer to sign in with your fingerprint/Face ID, or select Not now. That's all! Welcome to your new account! Log out for a new account creation If you already have installed WX.Network mobile app and you are logged in the account but want to import another account, just log out from the current account through the More tab by clicking to the exit icon. If you have any questions related to WX.Network, feel free to contact us via customer support. tags*: mobile register create accounts email seed new newbie

Last updated on Dec 23, 2024

WX Network: Account Recovery

Highlighted topics: - How to restore access to the email account - How to restore access to the seed account - How to restore access to the Ledger account The WX Network mobile application allows you to use tree types of accounts: an account associated with email, an account associated with the seed phrase and an account associated with Ledger. To restore access to your account, install the WX Network app. After installing the application, read the welcome information and click the Continue button. On the next tab, you will be asked to select the type of account you want to restore. Note: if you are already logged into the account, log out before making the next steps. How to restore access to the email account Step 1: If you already have an email account and want to restore access to it, then select Email (Sign Up or Login). Step 2: click on the Login via email Step 3: enter your account credentials: email and password. Note: If your account is protected by two-factor authentication, then you will also need to enter the 2FA code from the mobile authenticator to continue importing your account. Step 4: On the next tab, you need to protect your account with a passcode (enter the passcode twice). That's all! Welcome back to your account! How to restore access to the seed account Step 1: If you already have a seed account and want to restore access to it, then select Software (Log in with Seed). Step 2: click the Import (using QR code or manually). Step 3: at this stage, you need to choose a way to import your account: - click on the QR code icon in the Your Seed phrase area to import the account from the web or desktop version of Waves.Exchange via QR code; - or type the Seed phrase into the Your Seed phrase area to import the account using the Seed phrase directly. Step 4: - if you click on the QR code icon in the previous step, log into your Waves.Exchange account via the web or desktop wallet, go to the Settings tab, and click the Show QR Code in the Security section of the settings. After that, scan the QR code by the WX Network mobile app and agree with the Terms of Use; - if you chose to type Seed manually, enter the Seed phrase and agree with the Terms of Use. After that, just click on the Continue button to go to the next step. Step 5: create an account name and a strong password (enter the password twice), then click on the Log in button. Step 6: protect your account with a passcode (enter the passcode twice). That's all! Welcome back to your account! Log out before importing a new account If you already have installed WX Network mobile app and you are logged in to the account but want to import another account, just log out from the current account through the More tab. If you have any questions related to Waves.Exchange, feel free to contact us via customer support. tags: mobile recover synchronize import accounts email seed wx network newbie ​

Last updated on Dec 23, 2024

WX Network: Account deleting

Highlighted topics: - Intro - Email account deleting - Software account deleting Intro WX Network is a DeFi protocol based on the Waves blockchain that makes it easy to work with Waves accounts. Every Waves account linked with a private key that used to manage an account. WX Network allows you to access accounts on the Waves blockchain in the following ways: Software - the private key is stored in the memory of the user’s device/browser in encrypted form; Email - the private key is stored in a distributed database on an external server in encrypted form; Hardware - the private key is stored in the Ledger hardware wallet; Browser extension - the private key is stored in a browser extension (available only in the web version of WX Network). WX Network users can delete WX Network app connections to their Waves accounts. After deleting the connection to the “Email account” on any device, it will be impossible to access this Waves account anymore. When you delete the connection to the “Software account” on one device/browser, you can access this Waves account from any device/browser that has its private key saved in its memory. To remove a connection to a ”Ledger account” or an ”Account from an extension”, just log out of it in WX Network app. After deleting a connection to a “Ledger account” or “Account from an extension”, the account itself will not be deleted from the Ledger or Extension. When you delete a WX Network connection to an account, the personal data associated with it in WX Network is also deleted. You can find out more about personal data associated with your account in the Privacy Policy. Email account deleting Important: deleting WX Network connection to Email account is an irreversible process. Even if you have access to the email to which the account was linked, you will not be able to restore access to it and the funds in it after deletion. Important: by deleting WX Network connection to an email account, you only delete the linking of the account to the email, but not the transaction history of this account, since it is impossible to delete data from the blockchain. To delete WX Network connection to Email account, log into that account, move on the "More" section. Then scroll it down and click on "Delete account" button. In the next step, you should carefully read the information in the popup window, and only if you agree with the terms of the account deletion, type "Agree" and click on the "Continue" button. Once you confirm the deletion, send a confirmation code to the email associated with this account. Enter the code to the "Email verification code" area and click on the "Continue" button. Note: right after clicking on the "Continue" button, your account will be deleted. After deleting, it is impossible to restore access to this account or manage the tokens on its balance. Software account deleting Important: deleting WX Network connection to a Software account can be restored via Private key (Seed phrase) if you saved it before deleting. To delete WX Network connection to Software account, log into that account, move on the "More" section. Then scroll it down and click on "Delete account from device" button. In the next step, you should carefully read the information in the popup window, and only if you agree with the terms of the account deletion, mark the "I've saved my Seed and understand all the consequences" checkbox and click on the "Continue" button. Right after you click "Continue" button the connection to your Software account will be deleted. We offer a 24/7 support service, so if you have any questions after reading these articles, feel free to contact us. tags*: how delete remove email software seed ledger account newbie

Last updated on Dec 23, 2024

WX Network: How to activate 2FA for an email account

In order to add an additional layer of security to your account created via email, you could always enable two-factor authentication (2FA). This way of protecting your wallet serves as an additional confirmation of one's account ownership. Once your 2FA is enabled, you have a six-digit code, generated by a third-party two-factor application, e.g. either Google Authenticator or Microsoft Authenticator. To activate 2FA, log in to your account in mobile wallet created with your email and click on the More icon in the bottom right corner and turn on the Two-Factor Authentication as mentioned in the screenshot below. After that, a 6-digit verification code will be sent to your email address, which you will need to enter in the next window. In the next step, you will be prompted to download and install a mobile authenticator. Using the suggested links on Google Play and App Store, you can install Google Authenticator. After installing the authenticator, click the Continue button. In the next window, you will be provided with both codes: the one is a QR-code and secondly, you have it as a text. These credentials should be entered into the installed mobile authenticator. Important: Be sure to save the above-mentioned code. In case you lose access to the mobile authenticator, you will not be able to log into your account or disable two-factor authentication (2FA) without this code. After saving and entering the code into Mobile Authenticator click Continue. In the next step, confirm that you have saved the Backup key correctly, For that, enter 4 last characters of the Backup key and click I saved button. At the final stage, enter the 2FA verification code from the mobile authenticator in the following window. Now, every time you log into your account on any device/PC, you will need to enter the 2FA code. If you have any questions related to WX Network, feel free to contact us via customer support. tags: 2fa two-factor authentication email

Last updated on Dec 23, 2024

WX Network: Creating an account using Ledger

Сontents: - Preparing a Ledger device for operation - Install the Waves app on the Ledger device - Open the Waves app on your Ledger device - Import account into WX Network via Ledger Step 1: Preparing a Ledger device for operation 1. You've initialized your Ledger device. Note: WX Network supports Ledger Nano S, Ledger Nano X and Ledger Blue models. ​2. The latest firmware is installed. ​3. Ledger Live is ready to use. 4. Google Chrome, Firefox browser or WX Network Desktop app is installed. ​5. A seed (24-word recovery phrase) of your Ledger device is saved. ​Note: learn this article if you lost access to your Ledger device. Step 2: Install the Waves app on the Ledger device 1. Open the Manager in Ledger Live. ​2. Connect and unlock your Ledger device. ​3. If asked, allow the manager on your device by pressing the right button. ​4. In the Ledger Live catalog, find the Waves app and click Install. The installation window will appear and your Ledger device will display Processing... then the app installation will be finished. Step 3: Open the Waves app on your Ledger device - once the Waves app is installed, use the left or right button to find it on the dashboard. - press both the left and the right buttons simultaneously to launch the Waves app. Step 4: Import account into WX Network via Ledger Just follow the step-by-step instructions below to import/register the account associated with the Ledger device. 1. Make sure your Ledger device is connected, unlocked, other cryptocurrency apps are not running and not intercepting the connection between Ledger and WX Network wallet. The Ledger Live must be closed as well. 2. Open Waves app on your Ledger device ​3. Launch WX Network app 4. If you are using WX Network for the first time, read the welcome information and click the Continue button (left image). 4.1. If you already have an account in WX Network, then click the logout icon at the top right corner during the passcode stage (right image). 5. In the next stage, please make sure you have done all the steps from the screen: 6. If all steps have done correctly, the model of connected Ledger device appears on the screen. Tap on it to continue. 7. Next, you need to make sure that Waves app is launched on your Ledger device. If so, click the Continue button. 8. In the next window, choose the account avatar that affect the Waves address of the account and its ID. Note: save the Account ID, it would be needed for importing this account. 8.1. After choosing account avatar and saving Account ID, click on the Continue button. ​9. Finally, you need to confirm account creation on your Ledger device and shazam! Your account is created! If you have any questions related to WX Network , feel free to contact us via customer support. tags*: mobile import creation account ledger nano blue wx network newbie

Last updated on Dec 23, 2024

WX Network: cryptocurrency transfer through the Waves network

Highlighted topics: - Transfers to/from WX Network account - Transfer to/from MetaMask account The transfer of cryptocurrencies in any network requires a fee payment. However, this fee price can exceed the transfer amount and reach several tens of dollars. WX Network minimizes the users' fee cost for transferring their tokens by using a system of cryptocurrency bridges. What's more, BTC, ETH, USDT and many other cryptocurrencies can be transferred from one account to another through the Waves network, omitting any operations via the native network. To carry out such a transfer through the Waves network the Waves recipient address should be used and here we go with it. Transfers to/from WX Network account How to receive cryptocurrency To receive cryptocurrency from WX Network or MetaMask (with WAVES network adjusted) user just share your WX Network account address with the sender. Open the WX Network app, log into your account, choose the Wallet tab, and click on the Deposit button. In the next step, select the token you want to receive, for example, USDT. After choosing a token, you will be suggested to select the network which the transfer will be made through: select the WAVES network here. In the appeared window you will find the Waves address of your account in two formats: Waves format and MetaMask format. If the sender uses the WX Network service to transfer cryptocurrency to your WX Network account, then provide the sender with your Waves address in Waves format. If the sender uses the MetaMask extension (with the WAVES network adjusted) to transfer cryptocurrency to you, then provide the sender with your Waves address in MetaMask format. Note: cryptocurrency transfer to an account address in MetaMask format not through the Waves network will be caused a loss of funds. Note: to transfer cryptocurrency to your address in MetaMask format via the Waves net, the Waves network must be set up in the sender's MetaMask extension. How to send cryptocurrency WX Network users can send cryptocurrency to other users of WX Network or MetaMask extension (with the WAVES network set up). Open WX Network app, log into your account and click the Withdraw button in the Wallet tab to make such a transfer. In the next step, select the cryptocurrency you want to send, for example, USDT. After choosing a cryptocurrency, a withdrawal form will appear. In the withdrawal form, fill in the recipient's address in Waves format or MetaMask format, select the WAVES net as the transfer network, and enter the transfer amount. Note: if cryptocurrency is sent to the Waves address in MetaMask format, not via the WAVES network, it will result in a complete loss of funds. When the form is filled, click the Withdraw button. In the appeared window check the transaction data and, if everything is correct, click the Withdraw button. Transfers to/from MetaMask account How to receive cryptocurrency If you have a MetaMask extension which connected to WAVES network , then any user of WX Network or MetaMask (connected to WAVES network) can transfer cryptocurrency to you through the WAVES network. To receive cryptocurrency to your MetaMask account, open the MetaMask extension, copy your account address and provide it to the sender along with this instruction. Note: if cryptocurrency is sent to the Waves address in MetaMask format, not via the WAVES network, it may result in a complete loss of funds. So, ask the sender to make sure that he specifies the WAVES network as the transfer network in the withdrawal form. How to send cryptocurrency To send cryptocurrency via the WAVES network from MetaMask account, the WAVES network must be connected to the MetaMask extension. Note: if cryptocurrency is sent to the Waves address in MetaMask format, not via the WAVES network, it definitely will cause a complete loss of funds. Open the MetaMask extension, make sure that the WAVES network is active, click on the cryptocurrency you want to transfer. In the next step, click on the Send button, and specify the recipient's Waves address in MetaMask format. After entering the address, specify an amount your want to transfer and click on the Next button. Note: don't change the Gas price and the Gass Limit. Note: to transfer cryptocurrency from MetaMask account (with the WAVES network set up), at least 0.001 Waves have to be available on the sender's balance to pay the transaction fee. Finally, check the transaction data and confirm the transfer. If you have any questions related to WX Network, feel free to contact us via customer support. ​ tags*: mobile receive assets send tokens transfer deposit wx network metamask format

Last updated on Dec 23, 2024

WX Network: How to send and receive cryptocurrency through the PepeTeam Bridge?

Highlighted topics: - Intro - Cryptocurrency deposit through the PepeTeam bridge - Сryptocurrency withdrawal through the PepeTeam bridge Links to WX Network mobile apps: - Android - iOS Intro The WX Network team is working hard on decentralized solutions for its products and services. Decentralization increases the fault tolerance, and operational stability of the entire system as well as the transparency of the working mechanisms of its work. This essential concept meets the whole crypto community's demands while running a project with the high profitability of its investment products today. That is why our investment products are based on smart contracts which are available for public and audit. If the investment products’ mechanics is quite clear and does not raise questions, then decentralized payment gateways are a quite tricky task. On the one hand, the current gateways’ mechanics is easy to use, but, on the other hand, it's hardly scalable and does not provide the proper level of transparency. In search of an ideal solution, the WX Network team decided to integrate a non-custodial service which is provided by PepeTeam: cross-chain bridges based on smart contracts and decentralized backend services on the Waves blockchain as a transfer layer. After the audit of PepeTeam's smart contracts and its backend services, we implemented the bridges functionality into the WX Network. Note: in WX Network accounts imported from the MetaMask extension, the deposit and withdrawal of tokens through the PepeTeam bridge is not available as of now. Cryptocurrency deposit through the PepeTeam bridge Note: PepeTeam Bridge services are provided by PepeTeam, which is a separate platform owned by a third party. More information on the PepeTeam website. At the moment cryptocurrency deposit through the PepeTeam bridge is not supported by the WX Network Mobile apps. But you can use web version of WX Network to top up your account by following this awesome guide. Сryptocurrency withdrawal through the PepeTeam bridge Note: PepeTeam Bridge services are provided by PepeTeam, which is a separate platform owned by a third party. More information on the PepeTeam website. Open the installed WX Network app, log in to your account and at the bottom of the interface, tap the following icon, then tap Withdraw. In the next step, choose the cryptocurrency you want to withdraw or type its name in the search bar. In the following screen choose "Pepe Bridge" option and then fill out the appeared sending form specifing the recipient address and sending amount. Note: To send tokens to another WX Network account, use its Waves address, as described in this great article. Please read the conditions carefully and check the entered data before you proceed. After filling the form out, tap "Transfer", double-check the entered data in the pop-up window, and tap "Invoke" one more time. Processing usually takes up to 30 minutes to complete. If you have any questions related to WX Network, feel free to contact us via customer support. tags*: mobile receive assets send tokens transfer deposit newbie pepeteam pepe team bridge

Last updated on Dec 23, 2024

WX Network: How Do I Send and Receive Cryptocurrency?

Highlighted topics: - How to Receive cryptocurrency from external blockchain - How to Send cryptocurrency to external blockchain - How to send/receive cryptocurrency through the Waves network To send and receive assets on mobile devices use the latest version of WX Network mobile app: - Android - iOS How to Receive cryptocurrency from external blockchain ⚠️ When receiving cryptocurrency, please carefully read the transaction conditions displayed in the user interface. While we don't charge any fees for the deposit transactions, the sender side may charge commission for the transactions. The transaction fee may vary depending on the selected cryptocurrency. Open the installed WX Network app, log in to your account, and at the top left corner of the interface tap the pointed icon, then tap Deposit. Select the cryptocurrency you want to receive from the list or type its name in the search bar. In the next, you will be prompted to choose the network you want to use for the deposit. Depending on the chosen cryptocurrency, you will be offered one or more networks through which you can replenish your account balance. Once you choose the network, the deposit address will be displayed. Use the displayed address or the QR Code for the payment. Please read the conditions carefully and check the entered data before you proceed. ⚠️ Take into account that there is a minimum deposit amount. Please use the displayed address only for sending the selected cryptocurrency from external non-WX Network wallets. Sending other than the selected cryptocurrency to this address may result in the total loss of your deposit. Note: You can receive Bitcoins to SegWit Address or Legacy Address. SegWit Addresses begin with bc1 and have reduced transaction fees, but may not be supported in some cases. Legacy Addresses begin with 1 and work everywhere. Both are safe to use. How to Send cryptocurrency to external blockchain Open the installed WX Network app, log in to your account and at the bottom of the interface, tap the following icon, then tap Withdraw. In the next step, choose the cryptocurrency you want to withdraw or type its name in the search bar. In the following screen choose a network you want to send tokens to and then fill in the sending form specifing the recipient address and sending amount. Note: To send assets to WX Network accounts, use the recipient's WX Network address, as described in How to Receive Assets from WX Network Users section. Please read the conditions carefully and check the entered data before you proceed. After filling the form tap Withdraw/Transfer, double-check the entered data in the pop-up window, and tap Withdraw/Invoke one more time. Processing may take up to 60 minutes to complete. If you have any questions related to WX Network, feel free to contact us via customer support. tags*: mobile receive assets send tokens transfer deposit newbie pepeteam pepe team bridge

Last updated on Dec 23, 2024

WX Network: WX Staking

Highlighted topics: - Introduction - How to stake WX - WX staking reward Introduction WX.Network offers a wide range of investment products. Among them stands out, of course, Staking of various cryptocurrencies. Waves staking attract users with its no-risks investment process, while LP staking is preferable for its high income. The launch of WX token (a core WX Network ecosystem token) made it possible to run a new original type of staking - Staking of WX tokens. Staking WX tokens provides users with the opportunity not only to receive a passive income but also to participate in the governance of WX Network. When you're staking WX, you “receive” gWXs, which increase/boost you income from the liquidity pools investment. The longer your staking period, the more gWX, and the greater your boosting. The boosting coefficient (max is x5) you get when locking your WX will be adjusted to your LP Staking pools tokens reward according to the amount of gWX and the liquidity pool you have invested in. You can read more about boosting and liquidity pools in the Liquidity Pools article. Your vote strength when voting for the verification of tokens, liquidity pools etc. depends on the number of gWX you have at the moment of voting. The voting procedure is described in more detail in the Token Verification article and in the Pools voting article. How to stake WX Open the WX Network app, log in to your account, and then click on the Investment item in the bottom menu. Scroll the page down to the WX Staking panel and click it. On the appeared tab, you can continue staking process, check the staking details (period, amount of staked WX, available WX tokens) and unlock the staked WX when the staking period is ended. To stake WX, click the Stake at the bottom of the tab. On the next window, select the WX blocking period (from 2 weeks till 4 years), specify the amount of WX you want to stake (at least 1 WX), confirm that you agree with a WX staking rules and, of course, click the Stake button. Note: if you already have staked WX, then the period of each new stakings will be the same as current lock period. You can extend period during the staking process. WX staking reward (deprecated) Until December 13, 2022, WX stakers received an additional reward, which consisted of trading fees. If you stake your WX until December 13, 2022, some of that reward may remains unclaimed. To check it, open the WX.Network app, log in to your account, and then click on the WX Staking panel in the Investment tab and click on the Claim button if you have unclaimed WX tokens. If you have any questions related to WX Network, feel free to contact us *tags: wx gwx staking boosting pools income claim

Last updated on Dec 23, 2024

WX Network: PepeTeam Staking

Highlighted topics: - Intro - How to stake tokens - How to unstake tokens - How to claim staking reward Intro PepeTeam staking is an investment product from PepepTeam that allows WX Network users to earn passive income from cross-chain swaps. As you know, when a user transfer Token to the Waves blockchain through the PepeTeam Bridge, he receives a wrapped Token: USDT-ERC20, USDT-BEP20, USDT-POLY and etc. Such a way gives him the opportunity to withdraw the same amount of the same token back to the original blockchain but limits cross-chain interactions. Therefore, the PepeTeam team issued synthetic tokens - USDT-PPT, which allowed to defragment liquidity transferred through the PepeTeam bridge. This greatly simplified WX Network interactions with PepeTeam products (for example, creating a “single” liquidity pool), and the PepeTeam team itself is allowed to create new investment and trading tools, which we integrated into our application. One of such investment tool is PepeTeam staking of USDT-PPT tokens. The mechanism of its operation is quite simple: some users put, for example, USDT-ERC20 into the PepeTeam pool, receive in return USDT-PPT and stake it, while other users use these USDT-ERC20 tokens to make cross-chain swaps. Swapers pay a fee, part of which is received by USDT-PPT stakers. How to stake tokens Log in to your WX Network account, deposit USDT through the PepeTeam Bridge and go to the "Swap" page. There you have to switch "Swap" form to the "Via PepeTeam" and fill it in: - select the token you deposited through the PepeTeam Bridge and a similar synthetic token that you want to stake - USDT-PPT; - enter the amount of deposited "wrapped" tokens that you want to swap; - check the swap conditions and click on the "Swap" button. Next, nevigate to the "Investment" section and tap on the "PepeTeam Staking". Then, click on the "Stake" button, enter the amount you want to stake and click on the "Stake" button one more time. How to unstake tokens The amount of staked tokens is specified below the staking form. This amount can be ustaked at any time you want. Just nevigate to the "Investment" section and tap on the "PepeTeam Staking". After that, click on the "Unstake" button, enter the USDT-PPT amount you want to unstake in the pop-up window and click "Unstake" button once again. How to claim staking reward After each swap, part of fee paid by swaper in spending token, is shared among all stakers. Since users swap different tokens, the reward for USDT-PPT may be paid in several tokens at the same time. Stakers can get their parts of accumulated reward at any time by clicking the "Claim" button in the "Staking Reward" area. If you have any questions related to WX Network, feel free to contact us. tags*: mobile app swap pepeteam stake staking reward income earn usdt usdc

Last updated on Dec 23, 2024

WX Network: Waves Staking

Highlighted topics: - Introduction - How to stake Waves - How to cancel Waves staking Introduction Waves staking allows the Waves holders to stake their Waves tokens to the staking pool to receive Waves as a reward. Also, making the network more reliable and secure. By staking Waves, you "rent" your Waves to a staking pool that uses them for mining (and nothing else). You don't lose control over your Waves: you can cancel staking at any time. How Waves staking works: - The rate of earnings is not regulated by a third party and is higher than any bank currently provides. - You can make sure that your payment has occurred or cancel your stake if there's something you're not comfortable with. You will never lose the earnings you have already accrued. - You don't have to retain your funds under someone's management. Your funds remain solely under your control (WAVES never leave your wallet). Each transaction is transparent and public (your personal data is safe). - Your staking balance and payouts are completely anonymous. Types of WAVES Staking Pools There are two types of WAVES Staking Pools: The Verified Pools and unknown pools. - The Verified Pools List is aiming to simplify pool research for our users. WX Network does not guarantee or affect the pool operation in any way. Any staking pool can apply to the Verified List. - Unknown pools are all other WAVES Staking pools that haven't applied to the Verified List. These pools are not displayed in the application, but if you stake your WAVES to them, you'll see the transaction in your Active staking list. You can check out the full list of WAVES Staking pools here. The staking reward depends on the conditions of the selected pool. Note: we do not regulate the payment process, so please carefully read the terms of payment and do your own investigation of the pool that you want to use before using Waves staking. The terms can vary between pools. How to stake Waves Open WX Network app and sign in to your account. Then click on the Staking button and choose WAVES Staking tab: In the next step, click on the Stake button. To stake your Waves you need to fill in the staking form: choose staking pool and specify Waves amount you want to stake. After that, click on the Stake WAVES button. If you stake your waves successfully, your staking will appear in the My Stakings section. How to cancel Waves staking Open WX Network app and sign in to your account to unstake your Waves. Then click on the Staking button and choose WAVES Staking tab: In the next step, navigate to the My Stakings section and click on the staking pool from which you want to unstake your Waves. After that, choose the staking you want to cancel. Finally, click on the Cancel All Stakings to unstake Waves. If you have any questions related to WX Network, feel free to contact us via customer support tags*: waves stake staking passive income earn reward

Last updated on Dec 23, 2024

WX Network: Referral Program

A referral program is a fabulous opportunity to increase your income from trading activity of your friends/acquaintances/fans. Each user pay the trading fees for the order creation. If trader's account was creates via the your referal link, you will receive 50% of trading fees paid by the referal. To participate in the Referral Program open the WX Network mobile app and log in to your account. Then, click on the More icon in the bottom right corner and select the Referral Program option in the menu. Find your referral link in the opened tab then. Copy and share it with your friends or acquaintances, you can also post it on social networks (for example, on your Twitter profile). You can find the following statistics in the Referral Program tab: the number of users registered accounts using your referral link (Total Referrals), summary income from all your referals. To receive a referrer reward, click the Claim WX button below the statistics area. Terms of the Referral Program 1. Only a newly created account via the referral link provided by the referrer or the one with no incoming and outgoing transactions can become a referral. 2. The reward payouts on the Referral Program are made on Tuesdays, once a week. 3. The reward for participation in the Referral Program is claimed by every participant of the Referral Program individually. The Available for Claiming field shows the amount of WX to claim for participation in the program. If you have any questions related to WX Network, feel free to contact us. tags*: invite ref bonus friend referral program staking wx reward increase trading spot

Last updated on Dec 23, 2024

WX Network: Lambo Investment

Highlighted topics: - What is the Lambo Investments - How to Invest funds in Lambo - How to Withdraw funds from Lambo About Investing in Lambo Lambo Investments is a semi-DeFi product on the Waves blockchain that is driven by the automated market order execution system based on pre-programmed trading commands or specifications. Tokens invested in LAMBO investment are accumulated on the Waves blockchain and then proxied into algorithmic trading strategies among few centralized exchanges, like Bitmex, Binance, Okex, etc., part of the invested funds are also used on WX.Network. ​ For instance, investing USDTs, you receive USDTLAMBO in return and your USDTs are transferred to the LAMBO smart-contract for storing. Each day AMM bot deposits or withdraws USDTs to/from LAMBO smart contract depending on the trading results. This results in a change in USDTLAMBO collateral and, therefore, USDTLAMBO price. Your income is a difference between the USDTLAMBO asset price when you invest and the future price set when you withdraw your investment. ​Important: The process of withdrawing invested assets from Lambo Investments takes 20 160 blocks (about 2 weeks). Lambo stands out among other WX Network algorithmic trading investment products due to its low risk. The trading strategy provides max possible drawdown not deeper than 10% while the percentage of profitability is floating at a consistently high level. How to Invest funds in Lambo Open WX.Network app and sign in to your account. After this step, click the Investments button and choose Lambo Investments. In the next step, select the token you want to invest in Lambo Investments. After the investment token choosing, you will be redirected to the Lambo Invest page where you can find out the investment conditions. Click the Invest button in this window to continue the investment. In the appeared window, enter the amount you want to invest in the I send field (in the I receive field will appear the approximate amount of the LAMBO token that you will be able to claim). After that, check the box I agree with rules, after reading the rules, and click the Invest --- button. Note: the amount displayed in the I receive field is calculated based on the latest price of the LAMBO token , so the actual amount of the received LAMBO token may differ from the displayed amount. Clicking the Invest --- means that you create a request to exchange the invested token for the LAMBO token. You will get LAMBO token from a smart contract after the end of the settlement period by clicking the Get --- button in the Lambo Investments Transactions field. Note: The exchange will take place at the new price of the LAMBO token, which will be calculated immediately after the end of the mentioned settlement period. The notification about the end of the settlement period shows your local time in a 24-hour format. How to Withdraw funds from Lambo Firstly, open WX Network app and sign in to your account. After this step, navigate to the Investments tab and choose Lambo Investments. In the next step, select the token you want to invest in Lambo Investments (for example, USDT). Click the Withdraw button in the appeared page. In the appeared window, enter the amount you want to withdraw in the I send field (in the I receive field will appear the approximate amount of the invested tokens that you are eligible to receive). After that, check the box I agree with rules, after reading the rules, and click the Withdraw --- button. Note: the amount displayed in the I receive field is calculated based on the latest price of the LAMBO token, so the actual amount of the received token may differ from the displayed amount. When you click Withdraw --- you create a request to exchange LAMBO token for invested token. The exchange itself takes place immediately after the settlement period, at the new price of the LAMBO token. The notification about the end of the settlement period shows your local time in a 24-hour format. In the meantime, your invested tokens will be locked on the contract for 2 weeks, then you will be able to get your invested tokens on the Lambo Investments page by clicking Get --- in the Lambo Investments Transactions field. If you have any questions related to WX Network, feel free to contact us via customer support tags*: lambo usdtlambo usdclambo usdt usdc wx network earn passive income reward

Last updated on Dec 23, 2024

WX Network: Neutrino staking

Highlighted topics: - Introduction - How to stake Neutrino tokens - How to unstake Neutrino token Important: Please keep in mind that DeFo products (DeFo stakings, Neutrino Pools Investments) are closing and their functionality will be gradually limited. Therefore, DeFo Staking and Neutrino pools are not available in the WX Network mobile app. If you want to unstake your DeFo tokens or withdraw XTN from Neutrino pools, please use WX Network web wallet. Introduction Neutrino staking allows WX Network users to receive passive income from investing Neutrino tokens in the staking pool. The staking pool exchanges the received tokens for Waves and, due to this, increases its mining balance, which allows it to generate new blocks in the Waves network more often and receive a reward for this more often. Note: XTN Staking feature has moved from WX Network to Neutrino website. Please use these step-by-step instructions to stake your XTN. How to stake Neutrino tokens Open WX Network app, log in to your account and navigate to the Investments tab. Swipe up on the Staking tab and choose Neutrino staking. In the next step you need to choose Neutrino token you want to stake: EURN, RUBN, CNYN, JPYN, UAHN, BRLN, GBPN, TRYN. After token choosing, you will be redirected to the Staking tab where you can familiarize yourself with the profitability, received rewards (if you stake the token earlier), and stake your token. To stake token, click on the Stake button. In the appeared form specify the amount you want to stake and tap on the Stake --- button. That's all! From now on, you will receive daily income until you cancel staking. How to unstake Neutrino token To unstake your Neutrino tokens open WX Network app, log in to your account and navigate to the Investments tab. After that, swipe up on the Staking tab and choose Neutrino staking. In the next step you need to choose Neutrino token you want to unstake: EURN, RUBN, CNYN, JPYN, UAHN, BRLN, GBPN, TRYN. In the following step, click on the Unstake button to unstake tokens. Finally, fill in the form specifying the amount you want to unstake and click on the Unstake --- button. Shazam! Your tokens are unstaked. If you have any questions related to WX Network, feel free to contact us via customer support tags: neutrino stake staking

Last updated on Dec 23, 2024

WX Network app: Start Trading on WX Network

Highlighted topics: - How to Buy Cryptocurrency - How to Sell Cryptocurrency - Trading cashback Note: Due to App Store restrictions, starting with version 1.6.1, the WX Network application no longer supports spot trading. Before sending, receiving and trading crypto assets, educate yourself to make informed decisions. Crypto assets are volatile, and the prices can go up and down. Carefully evaluate your trading goals and the financial risk you are willing to take. Please beware that WX Network does not provide financial, tax, or legal advice. You should make such decisions on your own or consult with reliable experts. Install the latest version of WX Network: - Android - iOS - Android APK Open the installed app, log in to your account, and tap on the Market icon. Then, choose a trading pair from the list above or use Search bar to find a trading pair by name or Token ID. Using the "All", "Opened", "Low Fee" filters you can quickly find all available pairs, the pairs where you have opened orders or pairs with low trading fees. The such sub-filters as WAVES | BTC | USDT... helps you to find pairs with these tokens. Tips: in order to add the selected pair to the favorite list, just click on the star icon. Tips: You can subscribe to push notifications when the price in a pair reaches a certain value. To do this, click on the Bell icon in the upper right corner of the Market tab, then click Plus icon in the upper right corner, select a trading pair and enter the price value or percentage change of price. Note: if you cannot find the asset by name or ID, perhaps, the asset is not verified by WX Network. In this case, you need to enable Unverified mode and try to find it one more time. How to Buy Cryptocurrency Select a pair you want to work with and tap Buy. Fill in the order form. - In the Order type area select Market order, Limit order or Stop-Limit order. - In the Amount box, enter the amount of currency you want to buy; - In the Price box, enter the price of the currency - In the Stop, specify the price that needs to be reached so that the order is included in the orderbook (only for Stop-limit orders); - In the Total box, check the total amount of the order. After filling in the form, tap Buy. The order sum and trading fee will be frozen for the order execution time. If the order is not executed and then canceled, tokens will be unfrozen. The order execution time is 29 days. After the expiration of the selected period, the order will be forcibly canceled. Note: a Market order is a request to execute a trade as quickly as possible at the current/market price. On the other hand, a Limit order sets the minimum or maximum price at which you are willing to buy or sell. The order gets executed once price level is triggered. Stop-Limit order differs from the Limit order in that it will be added to the orderbook when the price in the pair reaches the level specified during the Stop-Limit order's creation. Note: market orders can only be created in the following trading pairs: WAVES/BTC, WAVES/XTN, BTC/XTN, ETH/WAVES. Market order creation is available only in accounts associated with the Seed phrase. Note: If you have selected Limit order in the Order type area, you can tap Bid if you want to place buy order, tap Ask if you want to buy from the sell orders or tap Last if you want to buy by the market price; Note: By default, the Limit price sets with the nearest market price. Note: here are 2 types of fees available on the exchange*:* - A percentage fee for the most liquid token pairs. It will be 0.1% of the exchange transaction's amount, but no lower than the equivalent of 0.01 WAVES. The percentage fee is charged in the spending asset. - A fixed fee of 0.01 WAVES for other pairs. - In some trading pairs, fees may be higher or lower than stated; for example, pairs of Low Fee tab. - By the way, percentage fee may be different for buy and sell orders even in the same trading pair. All placed, executed or canceled orders can be viewed on the Order History tab. The Open Orders tab displays only currently active orders. Note: You can cancel an open order. To do this, click on "X" in the list of the required order and in the right part of the order. If you want to cancel all open orders, click on the Cancel All button How to Sell Cryptoсurrency Select a pair you want to work with and tap SELL. Fill in the order form. - In the Order type area select Market order, Limit order or Stop-Limit order. - In the Amount box, enter the amount of currency you want to sell or tap 10%, 50% or MAX; - In the Price box, enter the price of the currency; - In the Stop, specify the price that needs to be reached so that the order is included in the orderbook (only for Stop-limit orders); - In the Total box, check the total amount of the order. After filling in the form, tap Buy. The order sum and trading fee will be frozen for the order execution time. If the order is not executed and then canceled, tokens will be unfrozen. The order execution time is 29 days. After the expiration of the selected period, the order will be forcibly canceled. Note: a Market order is a request to execute a trade as quickly as possible at the current/market price. On the other hand, a Limit order sets the minimum or maximum price at which you are willing to buy or sell. The order gets executed once price level is triggered. Stop-Limit order differs from the Limit order in that it will be added to the orderbook when the price in the pair reaches the level specified during the Stop-Limit order's creation. Note: market orders can only be created in the following trading pairs: WAVES/BTC, WAVES/XTN, BTC/XTN, ETH/WAVES. Market order creation is available only in accounts associated with the Seed phrase. Note: If you have selected Limit order in the Order type area, you can tap Bid if you want to place buy order, tap Ask if you want to buy from the sell orders or tap Last if you want to buy by the market price; Note: By default, the Limit price sets with the nearest market price. Note: here are 2 types of fees available on the exchange*:* - A percentage fee for the most liquid token pairs. It will be 0.1% of the exchange transaction's amount, but no lower than the equivalent of 0.01 WAVES. The percentage fee is charged in the spending asset. - A fixed fee of 0.01 WAVES for other pairs. - In some trading pairs, fees may be higher or lower than stated; for example, pairs of Low Fee tab. - By the way, percentage fee may be different for buy and sell orders even in the same trading pair. All placed, executed or canceled orders can be viewed on the Order History tab. The Open Orders tab displays only currently active orders. Note: You can cancel an open order. To do this, click on "X" in the list of the required order and in the right part of the order. If you want to cancel all open orders, click on the Cancel All button How to cancel an order To cancel an order, navigate to the Trade tab, in this tab you can see your open orders. Then switch to the Open Orders tab, find the order you want to cancel. After that, tap on the "X" button and confirm the cancelation. Trading cashback To stimulate trading activity on the exchange, the WX Network team has launched a Trading cashback program. Under this program, a trader can get back a part of the trading commission he paid. The cashback amount depends on trading volumes and staked WX tokens. Cashback is paid in WX tokens. Cashback is calculated and paid out as follows: - within a month, the trading activity of each user is analyzed, - if the user's monthly trading volume reaches a certain value (see the table below), then he is considered a participant in the program, - the value (in USD) of trading fees he paid is calculated and converted into WX, according to the WX price, - then the amount of cashback is determined; it depends on the trading volume and the number of staked WX, - the trader can claim the accrued reward in the My Rewards tab. Let’s see how the proposed scheme is going to work, using an example. Say, Jack’s trading volume in January amounted to $520,000, and an equivalent of $500 was spent on paying trading fees. Jack can count on a cashback from his trading fees in the amount of 10% and if 1 WX = $0.5, the cashback will be 100 WX. But at the same time, Jack is an active WX staker and has 1,000 gWX. It means that he will receive an additional reward of 200 WX. In total, he gets back 30% of the fees he paid, although he could get more if he had more gWX on his balance. How to enable Unverified mode The WX.Network cares about the safety of our users. Therefore there are two modes of asset trading: Unverified mode and Verified Mode. The Verified Mode is activated on the WX.Network by default. To switch from Verified mode to Unverified mode, you need to go to the Market tab and click on the Verified button in the top right corner of the tab. After that, you must carefully read all the information in the appeared window, and if you agree to take the risk by trading unverified assets, type "Agree" and click on the "Continue" button. Note: If at least one of the assets in a trading pair is unverified, then such a trading pair is marked with a yellow triangle with an exclamation mark. WX Network is not responsible for the unverified assets, for their issuers, and for their values. By trading in a pair with an unverified asset, you take all the risks on yourself. If both assets are verified in a pair, then such a trading pair is marked with a blue asterisk with a checkmark. If you have any questions related to WX Network, feel free to contact us via customer support. tags: mobile trading exchange market limit order buy sell cryptocurrency tokens coins newbie

Last updated on Dec 23, 2024

WX Network: PepeTeam cross-chain Swap

Highlighted topics: - Intro - How to swap Intro Cross-chain swaps is a product of the PepeTeam that allows WX Network users to exchange tokens of different blockchains among themselves. So, if you transfer USDT from Polygon to Waves, then on the Waves blockchain you get “wrapped” USDT-POLY backed by USDT on the Polygon blockchain. Cross-chain swaps allow you to exchange, for example, USDT-POLY for “wrapped” USDTs of other blockchains (USDT-ERC20, USDT-BEP20, etc.), and deposit them in WX Network investment products or withdraw to the target blockchain through the PepeTeam bridge. The cross-chain swap uses the liquidity of the PepeTeam’s pool in which the tokens have been invested by other users to receive passive income from swaps. By making a swap, the user adds his token to the pool and receives another token from the pool. The smaller number of tokens in the pool, the more profitable to swap it to the ones whose more are in the pool. How to swap To swap tokens, log in to your WX Network account and clickon the "Swap" icon. There, switch the tab to the "Via PepeTeam", then select the tokens you want to swap, and enter the swap amount. After that familiarize yourself with the swap parameters and click on the "Swap" button. Swapers pay a fees for each swap which distributed among the USDT-PPT stakers. In 1 minute, you will receive the Token which you can invest in the Liquidity pool or transfer through the PepeTeam Bridge. If you have any questions related to WX Network, feel free to contact us. tags*: swap pepeteam usdt usdc transfer exchange

Last updated on Dec 23, 2024

WX Network: Swap

More than a year ago, the WX Network team launched liquidity pools, a very popular and common tool for earning passive income. The difference between our liquidity pools and pools on many other crypto platforms is that the liquidity provided by users is used by the AMM bot for trading on the spot market. For a year, this product has established itself as a reliable, highly profitable instrument. After that, its functionality was expanded through swaps, a more common mechanism for liquidity pools using. Swaps are a simple and fast way to exchange tokens, which allows increasing the arbitrage profitability by speeding it up. Swaps are also suitable for crypto newbies as they have a simpler interface compared to trading terminals. Making a swap, a user exchanges one token for another one at the price of the liquidity pool, which depends on the pool’s imbalance and pool’s spread. In addition, the amount of the exchange is affected by the swap commissions (service commission, pool commission) and slippage, that is, the difference in the token price when a swap starts and when it is finished. So, let's take a closer look at how to make a swap. First of all, head over to your WX Network account, tap on the Swap icon in the Wallet tab. In the next step, you need to select token you want to swap as well as token you want to receive. When you make a choice, and enter the amount of spending token, an amount of receiving token will be displayed in the I Receive field. Finally, it remains only to familiarize yourself with the Swap Rate, Slippage, and Fees and click the Swap button. That's it! The token is already in your WX Network account. If you have any questions related to WX Network, feel free to contact us. *tags: swap exchange change liquidity pool fast spot

Last updated on Dec 23, 2024

WX Network: Liquidity Pools

Highlighted topics: - What are Liquidity pools? - How to invest tokens in a liquidity pool - How to withdraw tokens from the pool - How to stake LP tokens What are Liquidity pools? Liquidity pools are an investment product that allows users to receive passive income by providing liquidity (tokens) to a pool for AMM (Automated Market Making). Users who have provided tokens to the pool are called liquidity providers. A liquidity pool is a smart contract with a pair of tokens on its balance (for example, WX/WAVES), that provides liquidity for WX Network decentralized trading. The liquidity pools facilitate and speed up the trading process by means of AMM (Automated Market Making). The AMM algorithm automatically places orders by using pools liquidity. AMM controls the proportion of tokens in each pool depending on the price change. By investing tokens in a pool, the liquidity provider receives the LP token (for example, WXWAVESLP). The growth of the LP token price and, accordingly, the cost of all LP tokens on the balance of the liquidity provider is its passive income. The liquidity provider is able to increase its income by staking LP tokens. Staking LP tokens, the liquidity provider receives WX tokens, the income from the sale of which is his additional passive income. To boost this additional passive income, the liquidity provider can vote for the liquidity pool he invested in. This will lead to an increase in the number of WX tokens that the liquidity provider receives for staking LP tokens. How to invest tokens in a liquidity pool Open WX.Network app, log in to your account, and navigate to the Investments tab. After that, choose Liquidity Pools. In the next step, you need to choose the pool you want to invest your tokens (for example, USDT/XTN). After pool choosing, you will be redirected to the pool's tab where you can familiarize yourself with the profitability, received rewards (if you invest in this pool earlier), and invest your tokens. To invest tokens, click on the Deposit tokens button. In the appeared form specify the amount of one of the tokens that you want to invest in the pool (the amount of the second token will be inserted automatically). After you specify the investment amount, the approximate amount of the LP token that you will receive will appear in the LP tokens amount you will get field. After that, click on the Deposit tokens button and your tokens will be invested. Note: you can also invest in any pool with one of the tokens. To do this, you need to select the appropriate token in the column I want to deposit. The Exchange fee is charged for one-token depositing. Each block in Waves network (every minute) you receive a reward for investing, which you can claim by clicking the Claim WX button. How to withdraw tokens from the pool Open WX.Network app, log in to your account, and navigate to the Investments tab. After that, choose Liquidity Pools. In the next step, you need to choose the pool from which you want to withdraw your tokens (for example, USDT/XTN). In the pool tab, click on the Withdraw tokens button to continue the withdrawal process. In the form that appears, enter the number of LP tokens corresponding to the number of tokens that you want to withdraw from the pool. Amounts of tokens that you receive as a result of the transfer of LP tokens will appear in the I receive field. Click on the Withdraw tokens button to withdraw tokens from investment. Note: you can also invest in any pool with one of the tokens. To do this, you need to select the appropriate token in the column I want to deposit. The Exchange fee is charged for one-token depositing. How to stake LP tokens To deposit LP tokens in staking, open the WX.Network app, log in to your account, select Investments in the lower panel of the application and go to the Liquidity Pools section. Select the pool whose LP tokens are on your account balance (for example, USDT/XTN) and click Stake now. In the next step, you can view how many LP tokens are available for staking. Note: all available LP tokens will be transferred to the staking. You cannot change the amount of tokens. Confirm the transaction by clicking the Stake button. If you have any questions related to WX Network, feel free to contact us via customer support tags*: liquidity pool wx network passive income app earn

Last updated on Dec 23, 2024